Type: Driver
File Name:
File Size: 36.6 MB
74 (4.12)
Downloads: 50
Supported systems: Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10
Price: Free* (*Free Registration Required)

Download Now

Ultra compact thermal printer only 9cm deepeasy to install 4 fastening holes thanks to the MY3 is the custom tg2460 printer for professional use. MY3 prints on 76mm paper width and is supplied Ultra light and compact it Custom tg2460 the rubbed roller anticlockwise to eject the paper out from the printing mechanism see fig. Insert the paper into the paper infeed opening so that it unrolls in the direction shown in fig.

Wait for the paper to load automatically see fig. To clean the unit, use compressed air or a soft cloth. Do not use alcohol, solvents or custom tg2460 brushes see fig.


Alcohol, solvent Fig. Release the lower side of the spring for the inspection cover from the position A as shown in fig. custom tg2460

Place the lower side of the spring in the position B custom tg2460 shown in fig. Be careful to move the upper side of custom tg2460 spring from the internal to the external groove on the pin of the inspection cover see fig.

Custom Thermal Printer TG2460 H Tear Off

A B Fig. User Manual TGH 1. Only for model without cutter.


The calculated result from combining this custom tg2460 with others is truncated to the minimum value of the mechanical pitch or an exact multiple of that value. Printable area Left margin Width of print area This command is only enabled at the beginning of the line. If right margin is greater than printable area, then the printing area width is set at maximum value. The waiting time is t 1 msec. After the button is pressed, the printer executes the macro once. The printer repeats the operation r times.

This command lasts for a period of t 1 custom tg2460. If this command is received while a macro is being defined, the macro definition is aborted and the definitions cleared. If the macro is not defined or if r is 0, nothing happens. After setting the current counter value in the print buffer as print data a character stringthe printer counts up or down based on the count mode set.

The counter value in the print buffer is printed when the printer receives a print command or is in the buffer full state. If the horizontal size exceeds the printing custom tg2460, the printer only feeds the paper.


This command is not affected by print modes bold, double strike, underline or character sizewith the exception of upside-down mode and justification. When the bar code used is UPC-A or UPC-E, the printer prints the bar custom tg2460 data after receiving 11 without check digit custom tg2460 12 with check digit byte bar code data. When the bar code system used is EAN13, the printer prints the bar code after receiving 12 without check digit or 13 with check digit byte bar code data. When the system used is EAN8, the printer prints the bar code after receiving 7 without check digit or 8 with check digit byte bar code data.

Drivers for manufacturers Custom engineering to Printers

The number of data for Custom tg2460 bar code must be even. When custom tg2460 odd number of data is input, the printer ignores the last received data.CG PRINTER TGH USB RS Accessories. CE KIT ROLL HOLDER+NPE SENSOR V TG; GE Metal frame (galvanized/aluminium alloy); High print quality ( DPI); Paper width: 60mm; Paper thickness: from 60 to 80 μm; Printing > mm/sec; RS

Related Posts